Modifiche al passo #8
Modifica di Andy Doddington —
Modifica approvata da Brendan
- Prima di
- Dopo il
- Invariato
Righe Passo
[title] Remove USB board, VGA board, and screws | |
[* red] Remove the three small screws from the USB board, and remove the USB board. | |
[* orange] Remove the two small screws from the VGA board. | |
- | [* yellow] Remove the one long screw from the VGA board, and remove the VGA board. |
+ | [* yellow] Remove the one long screw from the VGA board, and remove the VGA board. This is a tight fit and may require a little jiggling to remove/replace. |
[* green] Remove the five small screws from the motherboard. | |
[* light_blue] Remove the four long screws from the motherboard/CPU cooler. | |
[* blue] Remove the two short screws from the DP/USB/Firewire board. | |
[* violet] Remove the two mid-length screws from the left speaker, and disconnect the speaker connector from the motherboard. |