Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #1

Modifica in base a Jake Devincenzi-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] Insert wisdom hereUse the point of a spudger to flip up the locking mechanism on the I/O board connector.
[* black] Flip the spudger around and use the flat end to slide the I/O cable out of the connector.
[* red] Remove the two 3.1 mm T5 Torx screws from the I/O board.
[* black] Insert wisdom hereUse the point of a spudger to flip up the locking mechanism on the I/O board connector.
[* black] Flip the spudger around and use the flat end to slide the I/O cable out of the connector.
[* red] Remove the two 3.1 mm T5 Torx screws from the I/O board.

Immagine 3

Vecchia Versione

Nuova Versione