Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #23

Modifica in base a Andrew Bookholt-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] Insert wisdom hereGrab the logic board from both edges and lift it out of the midplane, minding any cables that may get caught.
[* black] When reinstalling your logic board, be sure to clean and apply a new layer of thermal paste to the U3 chip located on the underside of your logic board as well as its copper heat sink attached to the midplane.
[* icon_note] We have a [guide|744|thermal paste guide] that makes applying thermal paste a snap
.
[* black] Insert wisdom hereGrab the logic board from both edges and lift it out of the midplane, minding any cables that may get caught.
[* black] When reinstalling your logic board, be sure to clean and apply a new layer of thermal paste to the U3 chip located on the underside of your logic board as well as its copper heat sink attached to the midplane.
[* icon_note] We have a [guide|744|thermal paste guide] that makes applying thermal paste a snap
.

Immagine 2

Nessuna immagine precedente.

Aggiunto