Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #10

Modifica in base a Andrew Bookholt-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* red] Remove the single Phillips screw securing the inverter to the logic board.
[*
black] Insert wisdom hereLift the inverter straight up off the pins on the logic board.
[* icon_note] Be sure to lift the inverter straight up off the logic board, as the connector pins are very long and easily bent. If the pins bend during removal, use the connector on the inverter as a guide to bend them straight
.
[* red] Remove the single Phillips screw securing the inverter to the logic board.
[*
black] Insert wisdom hereLift the inverter straight up off the pins on the logic board.
[* icon_note] Be sure to lift the inverter straight up off the logic board, as the connector pins are very long and easily bent. If the pins bend during removal, use the connector on the inverter as a guide to bend them straight
.

Immagine 1

Vecchia Versione

Nuova Versione