Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Walter Galan-

Modifica approvata da Walter Galan

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Use the pointtip of a spudger to detach the three Airport board wiresantenna connectors up from their sockets on the Airport.
[* red] Remove the single 2.9 mm T5 Torx screw from the Airport
AirPort board.
[* black] Grasp the edges of the board and slide it out from its connector.
[* black] Use the pointtip of a spudger to detach the three Airport board wiresantenna connectors up from their sockets on the Airport.
[* red] Remove the single 2.9 mm T5 Torx screw from the Airport
AirPort board.
[* black] Grasp the edges of the board and slide it out from its connector.

Immagine 2

Eliminato

Immagine 3

Eliminato