Salta al contenuto principale

Modifiche al passo #3

Modifica in base a iRobot-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Carefully lift the logic board up and pull it away from you.
[* icon_note] This step requires some force, but if the logic board will not come up, make sure that you have removed all the necessary screws and connectors.
[* icon_note] On 800 MHz and above G4s, you must disconnect the fan cable from the logic board before you lift the board entirely off.

Immagine 1

Nessuna immagine precedente.

Aggiunto