Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #2

Modifica in base a Andrew Bookholt-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] To remove the optical drive thermal sensor, use the tip of a spudger to lift the center finger of the thermal sensor bracket while applying slight tension to the thermal sensor cable.
[* icon_note] If your thermal sensor is stuck to the optical drive, use the flat end of a spudger to pry the thermal sensor bracket off the drive.
[* icon_note] If the adhesive on the bracket refuses to stick, apply some double stick tape to the underside of both flat bracket ears.