Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #8

Modifica in base a Taylor Dixon-

Modifica approvata da Taylor Dixon

Prima di
Dopo il
Invariato

Righe Passo

[* black] UsingUse a spudger, disconnectspudger to pry up the black and white signal wires located at the bottom[guide|25629|coaxial cables|stepid=64972|new_window=true] attached to underside of the daughterboard.
[* icon_caution] Coaxial cable connectors and sockets are fragile. To avoid damaging the connectors, be sure to gently pry them straight off of the board.
[* icon_reminder] When reconnecting these cables, lay the daughterboard upside down on the battery and use tweezers to carefully position each connector over its socket on the board, then press it straight down until it snaps into place.
[* black] UsingUse a spudger, disconnectspudger to pry up the black and white signal wires located at the bottom[guide|25629|coaxial cables|stepid=64972|new_window=true] attached to underside of the daughterboard.
[* icon_caution] Coaxial cable connectors and sockets are fragile. To avoid damaging the connectors, be sure to gently pry them straight off of the board.
[* icon_reminder] When reconnecting these cables, lay the daughterboard upside down on the battery and use tweezers to carefully position each connector over its socket on the board, then press it straight down until it snaps into place.
[* black] Remove the daughterboard from the device.

Immagine 2

Vecchia Versione

Nuova Versione

Immagine 3

Vecchia Versione

Nuova Versione