Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Andrew Bookholt-

In attesa di approvazione


Righe Passo

[* red] Remove the two T8 Torx hard drive pin on the other side of the drive.
[* icon_reminder] The pins attach to the connector side of the hard drive.
[* icon_caution] If a thermal sensor is present on your hard drive, use the flat end of a spudger to pry it off and transfer it to your new hard drive.
[* icon_note] If you are installing a new hard drive, we have an [guide|751|OS X install guide] to get you up and running.