Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Andrew Bookholt-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Remove the two 4.8 mm T6 Torx screws securing the LVDSdisplay data cable to the logic board.
[* black] Grab the LVDSdisplay data cable connector by its black tab and pull it straight up off the logic board.
[* red] Remove the two 4.8 mm T6 Torx screws securing the LVDSdisplay data cable to the logic board.
[* black] Grab the LVDSdisplay data cable connector by its black tab and pull it straight up off the logic board.