Salta al contenuto principale

Modifiche al passo #4

Modifica in base a Jeff Suovanen-

Modifica approvata da Jeff Suovanen

Prima di
Dopo il
Invariato

Righe Passo

[* red] Use a T8 Torx security screwdriver to remove the eleven 10mm silver screws from the metal plate.
-[* orange] Use a Phillips #0 screwdriver to remove the eleven 4mm black screws from the metal plate.
-[* yellow] Pull off the three cables connected to the small portion of the motherboard showing through the metal plate.
-[* icon_caution] The cable connectors can be sharp.
+[* orange] Use a Phillips #1 screwdriver to remove the eleven 4mm black screws from the metal plate.
+[* yellow] Use a spudger to disconnect the three antenna cables (two black and one white) by prying them straight up from their sockets.