Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Anna Edwards-

Modifica approvata da Anna Edwards

Prima di
Dopo il
Invariato

Righe Passo

[* red] Use a PH1 Philips screw driver to remove the ten 5.5mm screws.
-[* orange] Continue to use a PH1 Philips screw driver to remove the two 5.5mm screws.
-[* icon_caution] Be careful to remove the washers along with the screws which are circled in orange
+[* orange] Continue to use the screw driver to remove the last two 5.5mm screws over the fan cover. With these screws, be sure to also remove the washers around them.

Immagine 1

Vecchia Versione

Nuova Versione