Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Will Budney-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] While depressing the connector lock, use a heavy duty spudger to pry the power supply connector away from its socket on the logic board.
[* icon_note] It will be necessary to work from alternate sides until the connector is free.
+[* icon_caution] Your power supply may have an ambient light sensor cable attached from the power supply to the logic board. If so, carefully use a spudger to push out the cable towards you using the sides of the cable alternatively to help you slide it out.

Immagine 3

Nessuna immagine precedente.

Aggiunto