Salta al contenuto principale

Modifiche al passo #10

Modifica in base a Lauren-

Modifica approvata da Jeff Suovanen

Prima di
Dopo il
Invariato

Righe Passo

[title] Testing and further adjustments
-[* black] Now to test. Re-assemble your console but don't put any screws back but those needed for the ground springs near the memory card slots.
- [* icon_caution] The memory card ground springs MUST be put back on prior to restarting your console! I do not know why, but I read that it was important.
+[* black] To test the lens calibration reassemble the console up to the ground springs near the memory card slots.
+ [* icon_caution] The memory card ground springs MUST be put back on prior to restarting your console.
[* black] If any further adjustments are necessary just turn the potensiometer no more than 1 or 2 degrees more per readjustment. Eventually you'll start to see less DRE messages.
- [* icon_note] Once you get no more DRE messages, turn the potensiometer a further 1 degrees to "future-proof" your lens from DRE messages in the future.
+ [* icon_note] Once there no more DRE messages, turn the potensiometer a further 1 degrees to "future-proof" your lens from DRE messages in the future.
[* icon_note] As stated in the title of this guide. This procedure may not fix your DRE problems if the faut lies elsewhere in the system. But this will cover about 98% of DRE messages.