Salta al contenuto principale

Modifiche al passo #4

Modifica in base a Lauren-

Modifica approvata da Jeff Suovanen

Prima di
Dopo il
Invariato

Righe Passo

[title] Removing the cooling fan
-[* black] Locate the two (2) Phillips #2 screws, remove them and put them somewhere safe.
+[* red] Unscrew the two screws using a #2 phillips screwdriver.
[* icon_note] It is not necessary to detach the cooling fan wire from the power button switch board.
-[* black] Lift the cooling fan housing slightly and slide it outwards and away from the rest of the unit. Just lay it on its side next to the unit.
+[* black] Slightly lift the cooling fan; slide it outwards and away from the rest of the Gamecube and lay it off to the side of the console.