Salta al contenuto principale

Modifiche al passo #4

Modifica in base a Christopher Cox-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

+[title] Removing the fan
+[* black] Locate the two (2) Phillips #2 screws, remove them and put them somewhere safe.
+ [* icon_note] It is not necessary to detach the fan wire from the power switch board.
+[* black] Lift the fan housing slightly and slide it away from the rest of the unit. Just put it to rest to the side of the unit.

Immagine 1

Nessuna immagine precedente.

Aggiunto