Salta al contenuto principale

Modifiche al passo #4

Modifica in base a Christopher Cox-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

-[title] Removing the fan
+[title] Removing the cooling fan
[* black] Locate the two (2) Phillips #2 screws, remove them and put them somewhere safe.
[* icon_note] It is not necessary to detach the cooling fan wire from the power button switch board.
-[* black] Lift the fan housing slightly and slide it outwards and away from the rest of the unit. Just lay it on its side next to the unit.
+[* black] Lift the cooling fan housing slightly and slide it outwards and away from the rest of the unit. Just lay it on its side next to the unit.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Nessuna immagine precedente.

Aggiunto