Modifiche al passo #1
Modifica in base a Andrew Optimus Goldheart-
Modifica approvata da Andrew Optimus Goldheart
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* black] Remove the following seven screws securing the logic board to the rear aluminum panel. |
| [* red] Six 2.1mm Phillips #00 |
| [* icon_note] One of these screws, at the top of the logic board, is tucked beneath the headphone jack assembly cable. Take care to hold the cable out of the way while removing and replacing this screw. |
| [* orange] One 2.5mm Phillips #00 |