Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Andrew Bookholt-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Disconnect the port hatch ribbon cable from the logic board by pulling it straight up by its black pull tab.
[* black] If necessary, pullPull the audio out ribbon cable off the adhesive securing it to the upper case.
[* black] Use a spudger to pry the audio out ribbon cable connector board off the hard drive bracket.
[* black] If necessary, pullPull the audio out ribbon cable off the adhesive securing it to the upper case.
[* black] Use a spudger to pry the audio out ribbon cable connector board off the hard drive bracket.

Immagine 3

Nessuna immagine precedente.

Aggiunto