Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Wade Harkins-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Using a Phillips size 0 screwdriver: Remove the 2 screws from the bottom of the camera

-[* black] CAUTION! When separating the 2 cases be cautious of the silver band and buttons that located in the middle of the camera. They will come loose. 

-[* black] Remove the 4 screws on the inner face of the camera. CAUTION! Circuit ribbon is attached at the top left of the camera be careful when separating the front and back of the camera after removing the 4 screws. 

-[* black] Carefully flip up the clip attaching the ribbon from the rear to the front and pull it out

-[* black] Carefully separate the front and back of the camera

+[* icon_caution] Before starting, be sure to remove the battery from the camera. See [guide|8369|Removing the Olympus Stylus 760 Battery Guide] for details.
+[* red] Using a Phillips size 0 screwdriver, remove the 2 screws from the bottom of the camera