Modifiche al passo #2
Modifica di Jacob Micallef —
Modifica approvata da Jacob Micallef
- Prima di
- Dopo il
- Invariato
Righe Passo
| + | [* black] ***GENTLY*** pull the bezel off. I used a small flat-blade screwdriver out of a glasses repair kit to do this. First I gently pried the bezel corners to loosen them, then slowly worked my way around, carefully tugging and pulling the bezel out of the plastic locks. |
|---|---|
| + | [* black] After you have the bezel off, there will be 4 Phillips screws on each side of the screen, near the edges (the picture shown here only shows 1 side). Again, use a Phillips #00 screwdriver to remove them. |
Immagine 1
Nessuna immagine precedente.
Aggiunto
Immagine 2
Nessuna immagine precedente.
Aggiunto