Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Casey Sheehan-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] RemoveUse two blue plastic opening tools to remove the three wire connectors connecting broad to other boardson the side of the input/output board.
[* yellow] RemoveUse a Philips #0 screwdriver to remove the four 5mmfive screws usingon the Phillips #0 screwdriverboard.
[* icon_note] One of the screws is hidden below the black tape. Sotape, so gently pull that asidethe tape to the side to getgain access to it. Be sure to replace the tape when reinstalling the board.
[* red] RemoveUse two blue plastic opening tools to remove the three wire connectors connecting broad to other boardson the side of the input/output board.
[* yellow] RemoveUse a Philips #0 screwdriver to remove the four 5mmfive screws usingon the Phillips #0 screwdriverboard.
[* icon_note] One of the screws is hidden below the black tape. Sotape, so gently pull that asidethe tape to the side to getgain access to it. Be sure to replace the tape when reinstalling the board.
[* black] Lift board from case.