Salta al contenuto principale

Modifiche al passo #10

Modifica in base a Taylor Shiells-

Modifica approvata da Taylor Shiells

Prima di
Dopo il
Invariato

Righe Passo

-[* red] Place blocks on the ground at the location where the gate panel is to be installed. These will support the gate while you are connecting the hinges.
-[* orange] Lift the gate panel into position so that the gate is lined up with the fence and at the desired height. Adjust the blocks as necessary to achieve the desired height.
+[* red] Place blocks on the ground at the where you will install the gate. These will support the gate while you are connecting the hinges.
+[* orange] Lift the gate panel into position so that the gate lines up with the fence and at the desired height. Adjust the blocks as necessary to achieve the desired height.