Salta al contenuto principale

Modifiche al passo #10

Modifica in base a Lucy Wiswall-

Modifica approvata da Lucy Wiswall

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Place blocks on the ground at the location where the gate panel is to be installed. These will support the gate while you are connecting the hinges.
-[* black] Lift the gate panel into position so that the gate is lined up with the fence and at the desired height. Adjust the blocks as necessary to achieve the desired height.
+[* red] Place blocks on the ground at the location where the gate panel is to be installed. These will support the gate while you are connecting the hinges.
+[* orange] Lift the gate panel into position so that the gate is lined up with the fence and at the desired height. Adjust the blocks as necessary to achieve the desired height.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione