Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Corey Brown-

Modifica approvata da Corey Brown

Prima di
Dopo il

Righe Passo

[* black] On one side of the existing gate, separate the top hinges:
[* red] Remove the bolt from the hinge strap on the fence post.
+ [* black] Wipe the excess lubricant from the bolt to avoid slipping.
[* orange] Slide the loosened hinge strap up to remove the pin from the loop on the gate hinge.
[* icon_note] The best tool to use for this project is a 9/16" socket wrench, but an adjustable crescent wrench will also suffice. Picture 1 shows a crescent wrench. Picture 3 shows a socket wrench.