Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Lucy Wiswall-

Modifica approvata da Lucy Wiswall

Prima di
Dopo il
Invariato

Righe Passo

[* black] On one side of the existing gate, separate the top hinges:
[* black] Remove the bolt from the hinge strap on the fence post.
- [* black] Slide the loosened hinge strap up to remove the pin from the loop on the gate hinge.
- [* icon_note] The best tool to use for this project is a 9/16" socket wrench, but an adjustable crescent wrench will also suffice. Picture 1 shows a crescent wrench. Picture 2 shows a socket wrench.
+ [* red] Slide the loosened hinge strap up to remove the pin from the loop on the gate hinge.
+ [* icon_note] The best tool to use for this project is a 9/16" socket wrench, but an adjustable crescent wrench will also suffice. Picture 1 shows a crescent wrench. Picture 3 shows a socket wrench.

Immagine 2

Vecchia Versione

Nuova Versione

Immagine 3

Vecchia Versione

Nuova Versione