Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #6

Modifica in base a Walter Galan-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] Using a pair of tweezers, insert the stripped ends ofFlip the logic board battery leads into their respective holes.
[* black] Insert the black lead into the rightmost hole.
[* black] Insert the red lead into the center hole.
[* black] Insert the white lead into the leftmost hole.
[* icon_note] To keep the leads in place, it may be helpful to first bend the battery leads into their final shape, then insert the stripped ends into the holes
over.
[* black] Using a pair of tweezers, insert the stripped ends ofFlip the logic board battery leads into their respective holes.
[* black] Insert the black lead into the rightmost hole.
[* black] Insert the red lead into the center hole.
[* black] Insert the white lead into the leftmost hole.
[* icon_note] To keep the leads in place, it may be helpful to first bend the battery leads into their final shape, then insert the stripped ends into the holes
over.

Immagine 1

Nessuna immagine precedente.

Aggiunto