Salta al contenuto principale

Modifiche al passo #5

Modifica in base a Andrew Bookholt-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Place the logic board flat on a table with the gold ground contacts facing up.
[* black] Using a pair of tweezers, insert the stripped ends of the battery leads into their respective holes.
[* black] Insert the black lead into the rightmost holehole nearest the hold switch.
[* black] Insert the black lead into the rightmost holehole nearest the hold switch.
[* black] Insert the red lead into the center hole.
[* black] Insert the white lead into the leftmost holehole furthest from the hold switch.
[* icon_note] To keepThe location of the leadshold switch is shown in place, it may be helpful to first bend the battery leads into their final shape, then insert the stripped ends into the holesred.
[* black] Insert the white lead into the leftmost holehole furthest from the hold switch.
[* icon_note] To keepThe location of the leadshold switch is shown in place, it may be helpful to first bend the battery leads into their final shape, then insert the stripped ends into the holesred.
[* icon_note] To keep the leads in place, it may be helpful to first bend the battery leads into their final shape, then insert the stripped ends into the holes.

Immagine 1

Vecchia Versione

Nuova Versione