Salta al contenuto principale

Modifiche a questo Step

Modifica in base a Mario T-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* yellow] To remove the power/input board first remove the three wire connections connecting this board to the other boards.
[* icon_note] If you are only trying to remove the LCD power board, skip to step 5. For all other guides, ignore this note and proceed normally.
[* red] Next remove the four 5mm screws using the Phillips number 0. Note that one of the screws is hidden below the black tape.
[* black] Finally remove the board from device.