Salta al contenuto principale

Modifiche a questo Step

Modifica in base a Mario T-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* blackyellow] To remove the power/input board first remove the three wire connections connecting this board to the other boards.
[* blackred] Next remove the four 5mm screws using the Phillips number 0. Note that one of the screws is hidden below the black tape.
[* blackyellow] To remove the power/input board first remove the three wire connections connecting this board to the other boards.
[* blackred] Next remove the four 5mm screws using the Phillips number 0. Note that one of the screws is hidden below the black tape.
[* black] Finally remove the board from device.

Immagine 1

Vecchia Versione

Nuova Versione