Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Andrea-

Modifica approvata da Andrea

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] InsertTurn the device so that the underside faces you, and that the side that binds the two halves faces upward. The opening of the device should be face down.
[* black] In this position you will see
a crease line between the device and the top cover. Gently Insert your blue plastic opening tool ininto the crack of the crease line, between the front and back cover to separate the piecesthem.
[* red] InsertTurn the device so that the underside faces you, and that the side that binds the two halves faces upward. The opening of the device should be face down.
[* black] In this position you will see
a crease line between the device and the top cover. Gently Insert your blue plastic opening tool ininto the crack of the crease line, between the front and back cover to separate the piecesthem.
[* icon_caution] Be careful when separating the front and back covers, as the two are held together by a thin wire.
[* black] Separate the halves of the case.