Salta al contenuto principale

Modifiche al passo #4

Modifica in base a Dominik Schnabelrauch-

Modifica approvata da Dominik Schnabelrauch

Prima di
Dopo il
Invariato

Righe Passo

-[title] dismounting pneumatic spring
-[* black] Insert wisdom here.
+[* black] Now you can use the same 6mm hexagonal to loosen the shaft of the rocker bearing on the right side of the frame.
+[* black] Pull the shaft about 2cm out of its bearing. ***Carefull!*** If you pull it out to far, your whole bike will break down.... at least more or less.
+[* black] Pull off the left sided cover of the rocker. Take care of the two spacers behind it! They are kind of tiny and easy to lose.