Salta al contenuto principale

Modifiche a questo Step

Modifica in base a Andrew Bookholt-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Free the first retainer clip on the bottom of the iPod using the small iPod opening tool.
-[* black] The other sides of the iPod should now easily come loose. Separate the front of the iPod from the back about an inch (or a couple of centimeters).
-[* icon_note] The iPod casing is now open, but don't completely separate the two halves just yet. A ribbon cables is still connecting the back panel to the rest of the iPod.
+[* black] Run the iPod opening tool around the lower left corner of the iPod and along the bottom seam to free the two retaining clips.
+[* black] Run the tool around the lower right corner of the iPod and along the right side seam to free all five retaining clips.
+[* black] The case of the iPod should now easily come loose. Ensure all retaining clips are free before proceeding.

Immagine 2

Nessuna immagine precedente.

Aggiunto