Modifiche al passo #6
Modifica di Manfred Wachtel —
Modifica approvata da Manfred Wachtel
- Prima di
- Dopo il
- Invariato
Righe Passo
| + | [title] Removal of rear metal frame |
|---|---|
| + | [* black] The next steps describes the removal of the black metal frame. |
| + | [* black] Be careful, do not touch the open contacts on the left side (pink)! You will be surprised by a "wake-up" electrical shock even 15 minutes after turning off the camera. The flash-condensator still holds enough energy! |
| + | [* black] Start on the right side of the camera. There is a small black plastic clip (yellow) which has to be lifted up a little bit. Slowly and carefully begin to separate the rear metal frame from the camera body. |
| + | [* black] A critical part is the very slim plastic cover on top (yellow). The red marker will show you which direction you have to move this sensitive plastic part. |
Immagine 1
Nessuna immagine precedente.
Aggiunto
Immagine 2
Nessuna immagine precedente.
Aggiunto
Immagine 3
Nessuna immagine precedente.
Aggiunto