Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #5

Modifica in base a Andrew Bookholt-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* icon_note] DisconnectingThe logic board is still connected to the front case by the following twodisplay ribbon cables may be challenging. To prevent strainingcable, located on the cables or connectors, you can only separateheadphone jack side of the two halveslogic board. When lifting the logic board out of the iPodfront case, do so as you would open a book by rotating the board about 1/2 inch during the processdisplay ribbon cable.
[* black] Use a spudger to slideLift the logic board from the click wheel connector side (the cable out of its connectoryou just disconnected) and lay the logic board next to the front case.
[* icon_note] DisconnectingThe logic board is still connected to the front case by the following twodisplay ribbon cables may be challenging. To prevent strainingcable, located on the cables or connectors, you can only separateheadphone jack side of the two halveslogic board. When lifting the logic board out of the iPodfront case, do so as you would open a book by rotating the board about 1/2 inch during the processdisplay ribbon cable.
[* black] Use a spudger to slideLift the logic board from the click wheel connector side (the cable out of its connectoryou just disconnected) and lay the logic board next to the front case.

Immagine 1

Nessuna immagine precedente.

Aggiunto

Immagine 2

Nessuna immagine precedente.

Aggiunto