Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #31

Modifica in base a HoyeBoye-

Modifica approvata da HoyeBoye

Prima di
Dopo il
Invariato

Righe Passo

[* black] Place brush cage housing upside down (blue part up).
[* blackred] Remove screw securing daughtercard.
[* black] Remove daughtercard by pulling up firmly onMove black and red wires inside the daughtercard.
[* icon_caution] IF NOT WEARING GLOVES, BE SURE YOU ARE WEARING AN ANTI-STATIC WRISTBAND
blue housing. This is required when separating the green brush cage assembly from the blue housing.
[* blackred] Remove screw securing daughtercard.
[* black] Remove daughtercard by pulling up firmly onMove black and red wires inside the daughtercard.
[* icon_caution] IF NOT WEARING GLOVES, BE SURE YOU ARE WEARING AN ANTI-STATIC WRISTBAND
blue housing. This is required when separating the green brush cage assembly from the blue housing.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione

Immagine 3

Nessuna immagine precedente.

Aggiunto