Aggiusta le tue cose Community Store

Modifiche al passo #11

Modifica di Natalie W —

Modifica approvata da Natalie W

Prima di
Dopo il
Invariato

Righe Passo

-[* red] Remove the 17 screws from the board using a T3 bit on your screw driver. Use a T4 bit if the screw is slightly stripped.
+[* red] Remove the 17 screws from the board using a T3 bit on your screw driver. Or, use a T4 bit if the screw is slightly stripped.
[* icon_note] The four silver screws on the top and bottom are 4.0mm Phillips #00, and the 13 black screws around the sides are 3.0mm Phillips #00.