Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #21

Modifica in base a Mike K-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] Place binder clips around the bezel to hold it in place. Use cardboard under the clips to keep from scratching the display assembly.
[* icon_note] ''The adhesive takes around an hour to set and 3 days to cure. Because of the bowing of the bezel during the removal process, the safest approach is to keep the clips in place for the entire three days.''
[* black] After three days, remove the binder clips and install the display assembly according to the [guide|3103] guide.
[* icon_note] ''The adhesive takes around an hour to set and 3 days to cure. Because of the bowing of the bezel during the removal process, the safest approach is to keep the clips in place for the entire three days.''
[* black] After three days, remove the binder clips and install the display assembly according to the [guide|3103] guide.