Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #17

Modifica in base a Mike K-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* icon_caution] Avoid placing any portion of the adhesive over the following areas:
[* icon_caution] Avoid placing any portion of the adhesive over the following areas:
[* yellow] Tooling holes on the left and right upper corners.
[* red] Camera.
[* orange] EMI Pad
[* black] On the flange of the display assembly:
[* green] Apply the '''6mm x 120mm''' stripstrip, red side up, to the area on the flange between the EMI pad and the adhesive strip on the left side.
[* blue] Apply the '''6mm x 30mm''' stripstrip, red side up, to the area on the flange between the EMI pad and the camera.
[* violet] Apply the '''6mm x 155mm''' stripstrip, red side up, to the area on the flange between the camer and the adhesive strip on the right side.
[* green] Apply the '''6mm x 120mm''' stripstrip, red side up, to the area on the flange between the EMI pad and the adhesive strip on the left side.
[* blue] Apply the '''6mm x 30mm''' stripstrip, red side up, to the area on the flange between the EMI pad and the camera.
[* violet] Apply the '''6mm x 155mm''' stripstrip, red side up, to the area on the flange between the camer and the adhesive strip on the right side.