Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #12

Modifica in base a Mike K-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] Place a metal straight across the sheet, aligned with the two 3mm marks made in the previous step.
[* black] With the exactoX-acto knife, cut a 3 mm wide strip of adhesive. ''To
[* icon_note] ''Tip: To
avoid gumming up the adhesive, start the cut on the white overlapped backing on the top.''
[* black] With the exactoX-acto knife, cut a 3 mm wide strip of adhesive. ''To
[* icon_note] ''Tip: To
avoid gumming up the adhesive, start the cut on the white overlapped backing on the top.''