Modifiche al passo #4
Modifica in base a Mike K-
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* icon_caution] Only insert the spudger from the outer edge of the display assembly, and do not push it more than 6mm (1/4in) towards the inner edge of the bezel - otherwise you risk damaging a gasket between the inner edge of the bezel and the screen. |
| [* black] Continue working up the right side in 1"-1.5" increments: |
| [* yellow] Apply heat to the unreleased area. |
| [* red] From the outer edge of the bezel, insert the flat side of the spudger to where it snugly fits under the lifted portion of the bezel. |
| [* orange] '''Gently twist''' the spudger. |
| [* icon_caution] Only insert the spudger from the outer edge of the display assembly, and do not push it more than 6mm (1/4in) towards the inner edge of the bezel - otherwise you risk damaging a gasket between the inner edge of the bezel and the screen. |