Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #4

Modifica in base a Mike K-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] While applying heat to the area, slipWith the spudger under the bottom right corner of the bezel. Then,bezel and while still lodged underapplying heat to the bezelarea, twist the spudger '''gently''' to release the double stick adhesive tape.
[* black] Continue workingworking, in 1-1.5in segments, up the right size of the bezel, across the top, and down the left side. Do no work on the bottom edge yet.
[* icon_caution] Only insert the bezelspudger from the outer edge of the display assembly, and do not push it more than 6mm (1/4in) undertowards the inner edge of the bezel - otherwise you risk damaging a gasket between the inner edge of the bezel and the screen.
[* black] While applying heat to the area, slipWith the spudger under the bottom right corner of the bezel. Then,bezel and while still lodged underapplying heat to the bezelarea, twist the spudger '''gently''' to release the double stick adhesive tape.
[* black] Continue workingworking, in 1-1.5in segments, up the right size of the bezel, across the top, and down the left side. Do no work on the bottom edge yet.
[* icon_caution] Only insert the bezelspudger from the outer edge of the display assembly, and do not push it more than 6mm (1/4in) undertowards the inner edge of the bezel - otherwise you risk damaging a gasket between the inner edge of the bezel and the screen.