Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #4

Modifica in base a Mike K-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* blackorange] With the flat edge of the spudger under the bezel and while applying heat to the area, '''gently twist''' the spudger to release the double stick adhesive tape.
[* blackorange] With the flat edge of the spudger under the bezel and while applying heat to the area, '''gently twist''' the spudger to release the double stick adhesive tape.
[* black] Continue working, in 1-1.5in segments, up the right size of the bezel, across the top, and down the left side. Do no work on the bottom edge yet.
[* icon_caution] Only insert the spudger from the outer edge of the display assembly, and do not push it more than 6mm (1/4in) towards the inner edge of the bezel - otherwise you risk damaging a gasket between the inner edge of the bezel and the screen.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Eliminato