Aggiusta le tue cose Community Store

Modifiche al passo #1

Modifica di Marty Rippens —

Modifica approvata da Marty Rippens

Prima di
Dopo il
Invariato

Righe Passo

[* red] Unscrew the two 3mm Phillips #0 head screws along the top edge of the device.
-[* icon_caution] The screws on the back panel strip easily. Go slow and press down firmly.
-[* icon_note] The screws on the back panel are held in by locking washers, and won't come out of the back panel.
+[* icon_caution] The screws on the back panel strip easily. Go slowly and press down firmly.
+[* icon_note] The screws on the back panel are held in by locking washers, so they won't come out of the back panel.