Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Kristen Gismondi-

Modifica approvata da Kristen Gismondi

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Use the blacknylon spudger tool to flip up the black retaining flap of the zero insertion force (ZIF) connector holding the strip in place.
[* black] Use the blacknylon spudger tool to flip up the black retaining flap of the zero insertion force (ZIF) connector holding the strip in place.
[* black] Grab the green circuit board and pull directly up to separate the glued down power strip.
[* black] Gently pull the circuit board out of its connector.