Salta al contenuto principale

Modifiche al passo #5

Modifica in base a Taylor Bratsch-

Modifica approvata da Taylor Bratsch

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] PullWith the display connector away fromflat end of a spudger, flip up the black flap of the display's ZIF connector.
[* black] Insert the pointed end of the spudger between the cable and
the motherboard with a spudgerand gently pull toward yourself.
[* icon_reminder] During reassembly, be sure to insert the cable into the connector up to the white line on the cable and then close the retaining flap
.
[* black] PullWith the display connector away fromflat end of a spudger, flip up the black flap of the display's ZIF connector.
[* black] Insert the pointed end of the spudger between the cable and
the motherboard with a spudgerand gently pull toward yourself.
[* icon_reminder] During reassembly, be sure to insert the cable into the connector up to the white line on the cable and then close the retaining flap
.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione

Immagine 3

Nessuna immagine precedente.

Aggiunto