Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #2

Modifica in base a Richdave-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] Remove the faulty EM10 filter. Using tweezers or pliers and a soldering iron works best.
[* black] Bridge what's left with a small piece of wire or soldering tin.
[* black] A
icon_note] A replacement EM10 filter is available [http://www.logictoyz.com/nintendo-ds/nintendo-ds-lite-spare-parts/ds-lite-em10-filters-.html|HERE] (as at 01/01/12) no doubt Otherother suppliers exist
[* black] Solder new EM10 filter into place, ensuring correct orientation. If required, check the new filter with a multimeter to confirm before installing.
[* red] Alternate method - Bridge the solder pads that correspond with each set of pads - yellow to yellow and cyan to cyan
[* black] Bridge what's left with a small piece of wire or soldering tin.
[* black] A
icon_note] A replacement EM10 filter is available [http://www.logictoyz.com/nintendo-ds/nintendo-ds-lite-spare-parts/ds-lite-em10-filters-.html|HERE] (as at 01/01/12) no doubt Otherother suppliers exist
[* black] Solder new EM10 filter into place, ensuring correct orientation. If required, check the new filter with a multimeter to confirm before installing.
[* red] Alternate method - Bridge the solder pads that correspond with each set of pads - yellow to yellow and cyan to cyan

Immagine 2

Vecchia Versione

Nuova Versione

Immagine 3

Nessuna immagine precedente.

Aggiunto