Salta al contenuto principale

Modifiche al passo #7

Modifica in base a raffaele-

Modifica rifiutata da Jake Devincenzi

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Peel up the orange Kapton tape securing the right thermal sensor cable to the logic board.
-[* black] Remove the following 15 screws:
- [* red] One 4.4 mm black Phillips screw to the right of the ram slot.
- [* orange] Eight 4.7 mm silver T6 Torx screws securing the logic board to the lower case.
- [* yellow] One 6.2 mm black T6 Torx screw on the right side of the left fan.
- [* green] Five 9.4 mm silver T6 Torx screws securing the left and right fans.
+[* black] Peel up the orange Kapton tape securing the middle thermal sensor cable to the logic board.

Immagine 2

Eliminato