Salta al contenuto principale

Modifiche al passo #4

Modifica in base a steve-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] Remove the foam bumper from the top of the right hinge of the display.
-[* black] Remove the silver T6 Torx screw securing the ground loop in the display data cable to the casing.
-[* black] Remove the single black T6 Torx screw securing the clear plastic shield over the right ambient light sensor.
-[* black] Lift the clear plastic shield off the right ambient light sensor.
+[* red] Remove the silver T6 Torx screw securing the ground loop in the display data cable to the casing.
+[* yellow] Remove the single black T6 Torx screw securing the clear plastic shield over the right ambient light sensor.

Immagine 3

Vecchia Versione

Nuova Versione