Salta al contenuto principale

Modifiche al passo #3

Modifica in base a davidroady-

Modifica rifiutata da Jake Devincenzi

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Disconnect the eight indicated connectors by placing a spudger beneath each one and lifting up.
+[* black] Disconnect the eight indicated connectors by placing a spudger beneath each one on the cable side and lifting up. Be sure to pry up from the side with the wires, just under where they connect! Any other point will break the connector off the board.
[* icon_caution] Use care when disconnecting some of the smaller connectors. A forceful prod with the spudger may accidentally break them off the logic board.